DIY: Clutch/Flywheel/Rear Main

[Tnhatch03]

great Davis!

[davisj3537]

Hey davis, get a DIY for bleeding the clutch! Im having trouble doing it.

I'll see if I can't do it this Sunday. I've got a customer coming over for some camshafts...i'll get some pics and see if I can't muster up a Bleeding DIY.

[03Si757]

I'll see if I can't do it this Sunday. I've got a customer coming over for some camshafts...i'll get some pics and see if I can't muster up a Bleeding DIY.

Good deal man. Best insider on this site

[02Si&07Si]

Hey man, what grease did you use, im at this part on an engine swap, and I cant seem to find any. Checked honda and they looked at me like i was stupid.

Because thats what they think lol. So lets just think that back since they give us stupid reasons for not fixing problems that began with them.

Great write up. Go Sharks. And yea beg someone to help you with this, The Subframe itself is a heavy biotch and took friends to help me do this. P.S. Without a lift... whew goodluck.

[Laz's EP]

Great write up, How hard is this job to do. I need to replace some syncros in my tranny and I have someone that will do the job but doesn't have time to remove the tranny. You said that it was a 4 hour job, is that to remove and re install the tranny?

I was thinking of doing this, I can do it in my garage.

What do you think, anyone with some type of mechanical experience can do this?
Thanks

[Guardian]

HELP! Im not sure if the Pressure plate is supposed to rest against the flywheel. There is a good amount of space between the pressure plate and flywheel when mounted.

the disc was on backwards

[Fico]

so basicly, once the engine is just chilling there gellin, you take the intermidiate shaft off by slipping it out, are you able to take the drivers side axel out as easy? or do i need the socket for the hub?

[davisj3537]

Great write up, How hard is this job to do. I need to replace some syncros in my tranny and I have someone that will do the job but doesn't have time to remove the tranny. You said that it was a 4 hour job, is that to remove and re install the tranny?

I was thinking of doing this, I can do it in my garage.

What do you think, anyone with some type of mechanical experience can do this?
Thanks

I can get the tranny out in 1 hour flatyou can do it buddy. I have done a good number of them but still I say you can do it man. Just follow this is you get lost or stuck.

[davisj3537]

so basicly, once the engine is just chilling there gellin, you take the intermidiate shaft off by slipping it out, are you able to take the drivers side axel out as easy? or do i need the socket for the hub?

I only took the axles out of the tranny and then let them rest on the ground still attached to the hub.

[Fico]

I only took the axles out of the tranny and then let them rest on the ground still attached to the hub.

thats what i figured, but there is really enough play to get them out? it seemed like there wouldnt be

[davisj3537]

thats what i figured, but there is really enough play to get them out? it seemed like there wouldnt be

There is if you remove the lower control arms You have to remove those anyway if you are removing the subframe(atleast the way I do it).

[Fico]

There is if you remove the lower control arms You have to remove those anyway if you are removing the subframe(atleast the way I do it).

Ohhh yeah. i completely forgot about that shit, lol those axels will come out easy peesey that way lol

[davisj3537]

Ohhh yeah. i completely forgot about that shit, lol those axels will come out easy peesey that way lol

Easy peesey is right sir

[02_epdriver]

Thats awesome great job man. I need to do this really soon here

[locoep3]

nice rite up