K24a8 swap questions and opinions.

[K20wagon]

it's the passenger mount bracket from a crv that you would need. And it should be okay on a stock ecu if you don't have ANY bolt-ons. Your 5speed will bolt up just fine.

I wasnt sure if it was the rear tranni mount or the passenger side mount. I mean the k24a8 goes in the 07-08 accords and 07-08 elements. So wasnt to sure bout that. And I have race header and exhuast on my car now but will be putting the stock cat and everything on till I can get kpro. And will it be the same as the k24a1 having to run the 310cc injectors in it with the stock ecu.

[EPSU3]

Isn't the exhaust mani strange on the A8? Also the hp gain is from the head change and ecu change so I'm not sure this one would run as safely as the a4 or a1. Just speaking hypothetically. For $300 bucks though its worth the try.

[K20wagon]

I think like the a1 you will have to run without the front sway bar with the stock cat. And ya its a damn good deal for 300 bucks though dont know if it runs. When I get it I am going to take it apart and check evrything.

[Jynkxsiep3]

Im about to do the samething also need help on whats needed for using stock ep3 ecu and could i be able to keep ac on it its a must here in tx.

[Jynkxsiep3]

If you ever got more info on the swap i will apreciated if you could pass it on going the same way and i wanted to know whats needed to keep the stock ecu for a while and still be drivable.