Installing the spoiler is very straight forward. I had one on last summer and put it on right when I bought it in a parking lot in less then 15 minutes.
You have to take off the interior plastic piece at the top of the hatch which just pops right off and remove the brake light housing, all bolts are 10mm I believe. From there you will see 4 nuts and bolts underneath where you removed the plastic, remove them, and then there are 2 more closer to the ends of the spoiler, remove them as well. From there wiggle it off there is some Velcro and clips holding it that should pop right out and stay attached to the stock wing. From there mount up the new spoiler, helps if you have someone to hold it up, then put everything back on in reverse order of what I listed and BAM you have a sexy looking spoiler.
have fun
Bookmarks